Dunlop CR three V1 vs Franklin C45 14mm
On published specifications these two are very close. Every derived index sits within 8 points, which is inside the margin of an estimate built from spec sheets. Choose on price, handle length, or whichever brand you can demo.
DinkDex is reader-supported. When you buy through links on this page we may earn a commission, at no additional cost to you. This never affects which paddles we rank or how we rank them.
| Spec | DunlopCR three V1 |  |
|---|---|---|
| Price (MSRP)Manufacturer Spec | $229.99 | $229.99 |
| PowerDerived | 48 | 51▲ |
| ControlDerived | 59▲ | 54 |
| SpinDerived | 88 | 88 |
| ForgivenessDerived | 46▲ | 43 |
| Swing weight indexDerived | 36 | 37 |
| Core thicknessManufacturer Spec | 15 mm | 14 mm |
| Face materialManufacturer Spec | Raw carbon | Raw carbon |
| Core materialManufacturer Spec | Polypropylene honeycomb | Polypropylene honeycomb |
| ShapeManufacturer Spec | Hybrid | Hybrid |
| LengthManufacturer Spec | 16.2" | 16.2" |
| WidthManufacturer Spec | 7.7" | 7.7" |
| Handle lengthManufacturer Spec | 5.3" | 5.7"▲ |
| Static weightManufacturer Spec | 7.75 oz | 7.56 oz |
| Balance pointDerived | 21.1 cm | 21.6 cm |
| ThermoformedManufacturer Spec | No | No |
| USAP approvedManufacturer Spec | Yes | Yes |
| ReleasedManufacturer Spec | 2026 | 2025 |
These two are hard to separate
Every derived index is within a few points. Our scores come from spec sheets, and spec sheets can't capture feel — at this margin the honest answer is that you should demo both rather than trust a number.
Analysis
Where they actually differ
Only differences big enough to matter are listed. Anything inside the margin of an estimate is left out.
- Core thickness
- 15mm against 14mm. The thicker core dwells on the ball longer; the thinner one rebounds harder.
- Handle
- Franklin C45 14mm has the longer handle at 5.7" — the deciding factor if you hit a two-handed backhand.
Also consider
